Type-s and New Si clutch.

[InTheNameOfWeez]

Can anyone tell me if the stock Si clutch (fristion disk, pressure plate, and both bearings.) will bolt right up to a 2003 RSX-S. I don't see any reason why not, but have anyone tried/know if this is feesible or not?

[Lucid Moments]

When you say stock Si, what year? Are we talking 02-05 or 06+. The 02-05 will not bolt right up, as I understand it the alignment dowels on the RSX flywheel do not match up to the pressure plate. I don't know about the 06+.

[k-series]

The FG Si should have the same fittament as the RSX-S.

Steve

[HELLRAZR]

i don't know if this will help or not, but when my 6 spd was getting new synchros, we threw the 5 spd (k20a3 tranny) on the k20a which in turn has a 2004 EUDM CTR flywheel and clutch and it worked just fine. the rsx-s has the same mechanicals as the EUDM CTR both are k20a2's.

[bioevolve]

I think all k-seris tranny's use all the same clutch & flywheel numbers in the aftermarket world.

[poitogah73]

Hi i just installed a new clutch and resurfaced flywheel on my camaro ,it now has a bad vibration/shutter when i put it into gear,i aligned the flywheel with the clutch plate,i dont know what else it could be,any idea?
-Thanks

[k-series]

You're a troll dude, go play elsewhere.


Steve